The Timer; Setting The Clock - Sony CFD-980 Manual De Instrucciones

The Timer

Setting the clock

Before you set the clock, connect the AC
power adaptor (see page 25.)
Before you set the clock, "0:00" flashes.
Tip
The time display
system:
24-hour system
CLOCK
1
Press CLOCK for about 2 seconds until the hour
digit flashes.
2
Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER•
MEMORY.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
3
Press DISPLAY/ENTER•MEMORY.
The clock starts from 00 seconds.
TUNING/TIME DISPLAY/ENTER
SET +/– MEMORY
/
21 EN
The Timer