Garland BEAR 804 VE-V20 Manual De Instrucciones página 35

3. WARNING SYMBOLS
Warning labels indicate required information for the
use of the machine.
Carefully read this manual before starting
or using the machine.
Wear facial and auditory protection.
Use security gloves.
Use security boots.
KEEP HANDS AWAY FROM MOVING
PARTS. Do not attempt to charge the
machine if the pusher is not stopped.
Loosen the bleed screw before operating
the machine and tighten at the end
before transporting the machine.
CHECK THE CONDITION OF YOUR
MACHINE: Check the condition of your
machine before starting it and follow the
maintenance schedule. Keep guards in
place and working. Check that both keys
and adjustments are not in the work area
before starting the machine. Replace any
damaged, missing, or broken parts before
using the appliance.
Do not expose this machine to rain or
wet conditions. The water that enters
them will increase the risk of electric
shock.
Danger of electrical shock.
PROTECT THE ENVIRONMENT: Do not
throw the oil in drains, on the ground
or in the water. Recycle used oil and
take it to a clean point or follow local
recommendations.
Unplug the machine before carrying out
any operation on the machine, or if the
cord or plug is damaged.
Keep your workspace tidy. If I couldn't
cause incidents
Keep your hands away from moving
trajectory parts.
Attention! Danger !: The cutting tool can
project objects with force.
The machine must be operated by
a single person. Others should be
kept at a safe distance from the
work area. Never use other people
to help with the release of a stuck
trunk.
Displacement of the blade in both
directions.
Lifting point.
35/156
English