Descargar Imprimir esta página

Garland BEAR 804 VE-V20 Manual De Instrucciones página 41

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
5.2.4. MOUNTING THE RETAINING HOOK
Position the retaining hook by aligning it with the
holes as shown in the illustration and secure with two
M10x30 screws and their respective nuts.
M10 × 30
5.2.5 MOUNTING THE LOG LIFT
Position the log lifter aligned with the holes as shown
in figure 1. Secure it with an M16x90 screw and
its respective nut. Hook the chain to the bracket as
shown in figure 2 and the retaining hook to the log
lifter as shown in figure 3.
5.2.6 ASSEMBLING THE SUPPORT WHEEL
C
× 2
Pull the pin as shown in figure 1 and slide the square
tube through the hole as shown in figure 2.
Choose one of the two possible positions, hole "A" is
used for transport and "B" for storage of the machine.
Release the pin once you have chosen the desired
position.
1
41/156
2
3
M16 × 90
A
English
D
× 1
1
B
2

Publicidad

loading