Publicidad
Idiomas disponibles
Idiomas disponibles
4. MACHINE DESCRIPTION
4.1. CONDITIONS OF USE
This machine is designed for cutting logs up to 30 cm in diameter (*) and a maximum of 104 cm in length (*),
with the ends cut perpendicular to the axis of the trunk by shears due to pressure generated by a hydraulic piston
that applies the blade to the trunk. Any other use could be dangerous to you, people, animals and things that are
around and can damage the machine. The use of this machine for other than the designed operations may result
in dangerous situations.
Use this machine outside, in dry environments and in temperatures between 5°C and 45°C.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer is in no way liable for damages caused by improper or incorrect use of this machine.
4.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Carrying handle
2. Cutter column
3. Cut lever
4. Pressure lever
5. Reverse lever
6. Engine
7. Oil tank cap / air bleeder
8. Wheel
9. Work table
10. Blade
11. Log elevator
12. Claw
13. Switch / Plug
14. Arch of protection
15. Support wheel
Images and drawings in this manual are approximate and may not correspond with the actual product.
4
5
10
12
2
7
13
14
9
37/156
English
Fig. 4.2.
3
1
11
15
6
8
Publicidad
