Uline H-9730 Instrucciones De Montaje página 3

6. Push pedestal file (9) toward modesty panel (4) to hook
keyhole tabs on shoulder screws (K). (See Figure 5)
Figure 5
4
K
7. Attach back of pedestal file (9) to side panel with left
L-bracket (I) and four M6 x 15 mm bolts (F). Repeat
at front of pedestal file with right L-bracket (J)
and four M6 x 15 mm bolts. (See Figure 6)
Figure 6
I
8. Repeat steps 4-7 to install remaining pedestal file
on opposite side.
PAGE 3 OF 24
ASSEMBLY CONTINUED
9
Keyhole Tab
F
9
9. Place center drawer (5) upside down in desired
location on the desktop. Use four ST 5 x 16 mm
self-tapping wood screws (D) to secure.
(See Figure 7)
NOTE: Drawer holes can be started with drill
(optional).
NOTE: It is recommended to have drawer flush
with front edge of desktop panel.
Figure 7
D
10. With second person, set desk upright. Adjust glides
to compensate for uneven floors. Insert grommet
caps into desktop.
5
0322 IH-9730