Publicidad
Idiomas disponibles
Idiomas disponibles
3. Push pedestal file (9) toward modesty panel (4) to hook
keyhole tabs on shoulder screws (K). (See Figure 10)
Figure 10
4
K
4. Attach back of pedestal file (9) to side panel with left
L-bracket (I) and four M6 x 15 mm bolts (F). Repeat
at front of pedestal file with right L-bracket (J)
and four M6 x 15 mm bolts. (See Figure 11)
Figure 11
I
5. Repeat steps 1-4 to install remaining pedestal file
on opposite side.
PAGE 5 OF 24
L-DESK RETURN ASSEMBLY CONTINUED
9
Keyhole Tab
F
9
6. Attach connector plate (G) to desktop panel (1)
with four M6 x 15 mm bolts (F). (See Figure 12)
Figure 12
F
7.
With second person, set desk upright.
NOTE: Before proceeding, make sure desk is
positioned where it is intended to be used.
It is difficult to move when fully assembled.
8. Align L-desk modesty panel (8) with holes in
L-desk side panel (7). Use three M6 x 45 mm bolts (B)
to secure. (See Figure 13)
NOTE: For left-hand L-desk configuration,
L-desk side panel should be attached to
opposite side of the L-desk modesty panel.
9. Attach adjustable glides (C) to bottom corners of
each leg frame. (See Figure 13)
Figure 13
7
G
1
8
B
0322 IH-9730
C
Publicidad
