Trumpf TruTool F 140 Manual Del Usuario página 10

EN
1.4 Warnings in this document
Warnings warn about dangers that can occur
when handling the power tool. They come in
four danger levels that can be distinguished
by the signal word:
Signal word Meaning
DANGER Indicates a danger with high
risk, which can cause death
or severe injuries if it is not
avoided.
WARNING Indicates a danger with
medium risk, which can
cause severe injuries if it is
not avoided.
CAUTON Indicates a danger with low
risk, which can cause minor
or moderate injuries if it is
not avoided.
ATTENTION Indicates a danger that can
cause property damage.
1.5 Proper use
The TRUMPF seam locker is a hand-guided
power tool for the following applications:
– Locking Pittsburgh seams on pre-pro-
cessed workpieces, e.g. ventilation
ducts, housings, containers
– Locking of Pittsburgh seams on straight
and bent workpieces.
10 Translation of the original operator's manual
2 Product description
1
F 140
(2A1)
1 On/off switch
2 Power cable
3 Clamping lever
4 Sticker for shaping roller selection
5 Scale aluminum mm/ga
6 Scale steel mm/ga
7 Disk for processing outer radii
8 Adjustment screw
9 Cover plate
10 Shaping roller
11 Flange roller
12 Supporting roller
2
3
4
5
6
7
8
9
10
11
12