Publicidad
Idiomas disponibles
Idiomas disponibles
Product Overview
Installation
Minimum Cabinet/
Enclosure Dimensions
W
Min. 20 7/8" (531 mm)
H
Min. 33 7/8" (861 mm)
D
Min. 24 1/8" (612 mm)
Cabinet/Enclosure Preparation
● Install the refrigerator away from heat sources such as
stoves, radiators, direct sunlight, and direct weather such
as rain.
● Before connecting the power supply, level the appliance
by removing the supporting base and then adjusting the
front foot.
● Allow enough clearance between the refrigerator and
side wall so the door will open. The refrigerator is not
designed for recessed installation.
● There should be at least 1" (25.4mm) clearance between
both sides of the appliance. Behind the appliance there
should be at least 1" (25.4mm) of free space for ventilation.
CCD-0008366 Rev: 03-05-24
MIN
33 7/8"
(861 mm)
MIN
20 7/8"
(531 mm)
NOTE: Dimensions
include the required
clearance for venting.
Item
1
Temperature Control Box
2
Glass Shelves
3
Crisper Cover
4
Crisper
5
Leveling Leg
6
Can Rack
7
Rack
Appliance Dimensions
Before First Use
● Remove all packaging, including the foam backing at the
bottom of refrigerator and the tapes fixing accessories in
the box.
● Place the refrigerator in an upright position and let it
stand for at least 2 hours before powering it on.
● Clean the inside of the refrigerator, except for the
lamp holder and lamp, with moist cloth. Use a neutral
detergent to remove the "new" odor and dry thoroughly.
● Review product specifications to plan for proper
clearances in and around the enclosure.
- 4 -
Description
W
18 7/8" (480 mm)
H
32 7/8" (835 mm)
D
23 1/8" (587 mm)
Publicidad
