Descargar Imprimir esta página

Bosch B26FT Serie Instrucciones De Uso Y De Montaje página 9

Ocultar thumbs Ver también para B26FT Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

If the refrigerator doors are not
properly aligned:
Risk of electric shock!
Before removing the top panel:
1. Shut off the water supply to the
appliance.
2. Unplug
the appliance
or switch
off the fuse.
Determine which refrigerator door
needs adjustment.
2. Remove
the five screws
on the top
panel.
3. Raise the panel.
Adjusting the freezer
compartment
drawer
1. Determine
which
side needs
adjustment.
2. Loosen
the two screws.
Do not remove
the screws!
en-us
2. Insert the door handles
into the
guides.
• Refrigerator
doors: The handle
screws
must face the center of
the appliance.
• Freezer
compartment
drawer:
The handle
screws
must face
down.
4. Loosen
the screw.
Do not remove
the screw!
5. Move the hinge sideways
to adjust
the refrigerator
door.
6. Tighten
the screw.
7. Realign
panel.
8. Insert and tighten
the five screws.
3. Use the top screw to adjust the
freezer compartment drawer.
4. Tighten
the two screws.
Installing
the handles
Do not install the handles
until the
appliance
is installed
in its designated
location
and is level.
All handles
are the same and are
installed
in the same
manner.
1. Remove
the protective
films from
the refrigerator
doors and the
freezer
compartment
drawer.
3. Tighten
the handle
screws
with the
accompanying
Allen wrench.
i iii
Installing
the base plate
1. Remove
the three screws
on the
appliance.
2. Mount the base plate.
3. Insert the three screws
and
tighten.
9

Publicidad

loading