Publicidad
Idiomas disponibles
Idiomas disponibles
Table of contents
1
Introduction ........................................................
2
Product description (fig. 1) .................................
3
Scope of delivery (Fig. 1) ...................................
4
Proper use..........................................................
5
Safety instructions..............................................
6
Technical data....................................................
7
Unpacking ..........................................................
8
Operation ...........................................................
9
Working instructions...........................................
10 Cleaning and maintenance ................................
11 Storage...............................................................
12 Repair & ordering spare parts ............................
13 Disposal and recycling .......................................
14 Troubleshooting .................................................
15 Warranty conditions - Scheppach 20V IXES
series..................................................................
16 EU Declaration of Conformity.............................
17 Exploded view .................................................... 243
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Wear safety goggles.
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear protective gloves!
Lithium-ion battery
The product complies with the applicable
European directives.
16 | GB
1
Introduction
16
Manufacturer:
16
Scheppach GmbH
17
Günzburger Straße 69
17
D-89335 Ichenhausen
17
Dear Customer
19
We hope your new product brings you much enjoyment
and success.
20
Note:
20
In accordance with the applicable product liability laws,
22
the manufacturer of this product assumes no liability for
23
damage to the product or caused by the product arising
from:
23
• Improper handling
23
• Non-compliance with the operating manual
23
• Repairs carried out by third parties, unauthorised spe-
24
cialists
• Installing and replacing non-original spare parts
24
• Improper use
26
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper and
economic operation of the product, for avoiding danger,
for minimising repair costs and downtimes and for in-
creasing the reliability and extending the service life of the
product. In addition to the safety instructions in this oper-
ating manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety instruc-
tions before using the product. Only operate the product
as described and for the specified areas of application.
Keep the operating manual in a good place and hand
over all documents when passing the product on to third
parties.
2
Product description (fig. 1)
1.
Lever
2.
On/off switch
3.
Handle
4.
Battery mount
5.
Speed control
6.
Connection
7.
Tool attachment receiver
8.
Union nut
9.
LED work lamp
10.
Angle adapter
11.
Suction adapter
12.
Connection screw
13.
Delta grinding plate
14.
HCS plunge cut saw blade
15.
Diamond saw blade
16.
Scraper
17.
Sanding sheets
18.
Release button (battery)
19.
Battery*
* = not included in the scope of delivery!
www.scheppach.com
Publicidad
