cecotec POWER TITANIUM 650 EASYGO INOX Manual De Instrucciones página 18

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Lid/vacuum-sealing lid x2
2. Blending container x2
3. Blades
Main body
4.
5. Cooling tube x2
6. Grinder
7. Manual vacuum pump (not included)
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box contents
- PowerTitanium 500 EasyGo Inox blender
- Four-blade assembly (smoothie)
- Two-blade assembly (grinder)
- 2 600-ml blending containers
- 2 lids with handle suitable for vacuum
- 2 cooling tubes.
- Instruction manual
- Wash and dry the blender and its accessories carefully before use. Then, place the blender
on an even, firm, and dry surface.
34 POWER TITANIUM 650 EASYGO INOX
3. OPERATION
1. Fill the cooling tubes with water up to the mark located on their surface. Put them in the
freezer for 12-24 hours.
2. Put the ingredients in the blending container. Make sure the ingredients do not exceed the
600-ml mark on the blending-container surface. Close the blending container with the
blade assembly and turn it upside down.
Warning
Make sure the cooling tubes are not inside the blending container before starting blending.
They can only be placed inside the blending container once ingredients have been processed.
3. Connect the device to a power supply and fit the blending container onto the main body.
Press the blending container and turn it slightly clockwise to lock it in place.
4. Press the button on the device to blend the food.
Note
Do not use the device for more than 1 minute without pauses and allow a 2 minute rest
between uses.
5. Turn the blending container counterclockwise to unlock it and remove it from the
appliance main body. Unscrew the blade assembly, screw the cooling tube onto the
blending container's lid, and close the blending container.
6. Unplug the device.
Note
The appliance may block when overfilled. If this happens: turn it off, unplug it, and remove pour
some of its contents out. Then, try again.
Grinder
- Put the ingredients in the grinder. Close the grinder with the blade assembly and turn it
upside down.
- Connect the device to a power supply and fit the grinder onto the main body. Press the
grinder and turn it slightly clockwise to lock it into place.
- Press the device button to grind the ingredients.
- Turn the grinder counterclockwise to unlock it and remove it from the appliance main body.
Unscrew the blade assembly.
- Unplug the device.
Note
Use the grinder to pulverise or grind herbs, nuts, coffee, etc.
ENGLISH
POWER TITANIUM 650 EASYGO INOX 35