Descargar Imprimir esta página

EAS ELECTRIC EMIH280-3FWL Manual De Instrucciones página 48

Publicidad

Idiomas disponibles

Idiomas disponibles

HOB
BRACKET
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after in-
.
stallation (see picture)
9.6 Cautions
1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals
at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better heat radiation can be ensured to enhance
its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
9.7 Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
COUNTER
A
24
HOB
COUNTER
BRACKET
B
V.1

Publicidad

loading

Este manual también es adecuado para:

Emih280-3fl