Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 2 MOVE THE RANGE INDOORS
1 Tilt the range forward on the skid.
3 Drive the blade of the hand-truck beneath
the foam block.
You may need to remove the
front of the foam block to fit
through the doorway.
IMPORTANT: Do not remove the base foam
block while the hand-truck is in use. Place
the hand-truck blade underneath the base
foam block and transport the range to the final
location.
Insert Blade Under
the Foam Block
4 Attach the hand-truck straps around the unit.
IMPORTANT: Place the hand-truck straps below
the oven door handles. To avoid damaging the
side panels, place a pad between the hand-truck
and the range.
5 Tilt the range to lower the hand-truck wheels
off the skid.
Hand-Truck
Straps Below
Oven
Door
Handles
6 Place the appliance runners on the floor
at the left and right sides in front of the opening.
IMPORTANT: The runners provide a surface for
rolling the range into the final position and will
protect the floor finish. The runners must be
removed before leveling the range.
7 Move the range indoors. Position the range
in front of the installation location, onto
the runners.
Range
Opening
/
Runners
'
for Rolling
the Range
i
is
_
into...
_
Position
11
Publicidad
