StarLab ErgoOne E Instrucciones De Manejo página 14

5. Pipetting programs
Activity Designation
Normal PIP mode, see PIP
mode
pipetting
Pipetting for GEL mode, see
electro-
Electrophoresis (GEL)
phoresis mode
Mixing PIPmix mode, see
samples PIPmix mode
Reverse revPIP mode, see
pipetting revPIP mode
Dispensing DISP mode, see
DISP mode
NOTICE!
GEL mode
The GEL mode is not available for ErgoOne® E 1000 μl and 5000 μl Multi-Channel pipettes.
5.1 PIP mode
The default program – a previously entered volume is aspirated and dispensed again.
Volume and speed setting, see Set volume and Set the aspiration and dispensing speed.
14 · ErgoOne E Multi-Channel Pipettes · User Manual
®
Info
Standard program.
A previously entered volume is aspirated and
dispensed again
Program for loading electrophoresis gels. A previously
defined sample volume is aspirated at a high, variable
speed and slowly released again.
Program for mixing liquids.
Sample is aspirated and dispensed repeatedly.
Program especially for pipetting liquids with high
viscosity, high vapor pressure, or foaming media.
Program for dispensing liquids.
A volume taken up is dispensed again in partial steps.
a.
3x

b.

Call up menu selection: Pressing the menu key
three times takes you to the program selection.
'Mode' flashes.
Set PIP mode: Use one of the arrow keys to scroll
through the modes until 'PIP' appears.
'Mode' continues to flash.