Tabla De Contenido; Thanks For Choosing Toto; Before Installation; Common Tools Needed - Toto Aquia TS416C2 Manual De Instrucciones Y Del Propietario

TABLE OF CONTENTS
Thanks for Choosing TOTO ! ............................................................................2
®
Before Installation ...............................................................................................2
Common Tools Needed .....................................................................................2
Included Parts ......................................................................................................3
Warnings ..............................................................................................................3
Installation Procedure ..................................................................................... 4-5
Care & Cleaning ..................................................................................................5
Warranty ...............................................................................................................6
Rough-In Dimensions .......................................................................................17
Spare Parts ................................................................................................... 18-19

THANKS FOR CHOOSING TOTO!

The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.

BEFORE INSTALLATION

„ Observe all local plumbing codes.
„ Make sure the water supply is shut off.
„ Read these instructions carefully to ensure proper installation.
„ TOTO reserves the right to update the product design without notice.

COMMON TOOLS NEEDED

Adjustable
Screwdriver
Wrench
Adjustable
Hacksaw
Pliers
2

INCLUDED PARTS

Check to make sure that all these parts were included in your packaging:
Faceplate & Gasket * Escutcheon & Gasket
Threaded Base Valve Stem Extension
Long Screw and Washer
Set Screw & Hex Wrench
(1 piece each)
* Actual product may vary in appearance depending on the model.

WARNINGS

For safe operation, please observe the following:
„ Recommended operating pressure:
ƒ Minimum pressure.........20 psi (0.14 MPA), dynamic
ƒ Maximum pressure........80 psi (0.55 MPA), static
„ Do not solder connections directly to the valve as damage to internal
components may occur.
„ Do not use the product at an ambient temperature below 32°F (0°C).
Volume Control Knob *
Short Screws (4 pieces)
REQUIRED -
NOT INCLUDED
Valve with Plaster Guard *
TS2A or TS2D
3