Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - MAIN
MEMORY
A
MEMORY
SPEED
A
MEMORY
A
MEMORY
TIMER/
A
ALL OFF
SPEED
SPEED
SPEED
Press the FLAT (
will level. This action can be stopped at
any time by pressing another button.
MEMORY
B
Press the MEMORY A (
FLAT
ZG
MEMORY
(
) button and the Head/Feet positions
MEMORY
MEMORY
A
A
B
will go to the preset position. This preset
TIMER/
TIMER/
ALL OFF
ALL OFF
can be changed as shown later. This
SPEED
INTENSITY
MEMORY
action can be stopped at any time by
INTENSITY
B
pressing another button.
TIMER/
ALL OFF
MEMORY
B
SPEED
Press and hold the Flashlight (
MEMORY
button and the remote will act as a mini
B
flashlight. Release the button and after a
INTENSITY
few seconds, the flashlight will turn off.
TIMER/
ALL OFF
ZG
FLAT
INTENSITY
MEMORY
MEMORY
TIMER/
Use this feature to get out of bed without
A
B
ALL OFF
disturbing your partner. Press the Light
TIMER/
INTENSITY
ALL OFF
SPEED
INTENSITY
(
) button and the LED lighting under
the bed will light. Press again to turn
the under-the-bed lighting off. The LED
under-bed lighting will turn off on it's
own after five minutes.
USB: This bed can charge standard
devices that utilize a USB cable. A pair of
USB jacks are located on each side of the
bed base. Simply plug a USB cable into
one of the USB jacks, and the other end
into the device you want to charge.
Notes:
• When a unit connected to the USB
jack is fully charged, remove the plug
from the USB jack.
• When a button is pressed on remote,
all buttons will light to make it easier
to view in low light conditions.
• EMERGENCY LOWERING: If you
cannot find the remote control,
locate and press the red Emergency
Lowering button located on the main
control box on the bottom of the bed
(shown to the left).
11
) button and the bed
FLAT
ZG
MEMORY
MEMORY
A
B
TIMER/
ALL OFF
SPEED
INTENSITY
ZG
FLAT
) or MEMORY B
MEMORY
A
MEMORY
B
TIMER/
ALL OFF
SPEED
INTENSITY
ZG
MEMORY
A
SPEED
MEMORY
B
INTENSITY
FLAT
)
MEMORY
B
TIMER/
ALL OFF
INTENSITY
Publicidad
