GLIDEAWAY Comfort Base GRAND Manual De Instrucciones página 14

OPERATION - SETTING THE MEMORY PRESETS
To set the Memory A and/or Memory B
presets, perform the following steps:
1
Press the Flat (
is flat.
2
Adjust the head and feet positions as
desired.
3
Press and hold the TIMER/ALL OFF (
button until the remote's backlight starts
blinking (approximately three seconds),
then release the button.
4
Press the desired button to memorize:
MEMORY A (
the backlight will stop blinking to confirm
that the memorizing was successful.
5
To restore the Memory Presets to
their factory positions, press and hold
the TIMER/ALL OFF (
approximately six seconds; the remote's
backlight will blink after three seconds,
and then turn off after another three
seconds to confirm that the remote
was reset.
13
) button so the bed
FLAT
ZG
MEMORY MEMORY
A B
TIMER/
ALL OFF
SPEED INTENSITY
ZG FLAT ZG
) or MEMORY B (
MEMORY MEMORY MEMORY
A B A
TIMER/
ALL OFF
SPEED INTENSITY SPEED
ZG FLAT
MEMORY MEMORY
A B
) button for
TIMER/
ALL OFF
SPEED INTENSITY
FLAT
ZG
MEMORY MEMORY
A B
)
TIMER/
ALL OFF
SPEED INTENSITY
FLAT
);
MEMORY
B
TIMER/
ALL OFF
INTENSITY