Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY - BASE
It is HIGHLY recommended to use two people for the installation of this product. To
assemble, please perform the following steps:
1
2
To Control Box
Locking Clips
3
Carefully lift the base frame from the
shipping carton, keeping the unit top-
side-down. Remove the plastic wrapping
from the bottom to access the base.
Insert one end of the DC cord into the
power supply. Insert the other ends with
locking clips into the Control Box and USB
Charger cords. Lock the Control Box and
USB Charger cords using the locking clips.
Insert the AC cord into the power supply.
IMPORTANT: DO NOT PLUG THE BASE
INTO THE AC OUTLET YET.
4
Insert the legs into the threaded holes at
each corner of the base by inserting the
leg and rotating clockwise until tight.
Note: If setting two Twin XL's bases to
use with one king size mattress, connect
the Sync cable to the control box (as
pictured) to one base. After bases are
arranged, connect the second Sync Cable
to other base's control box.
6
Publicidad
