GLIDEAWAY Comfort Base GRAND Manual De Instrucciones página 15

OPERATION - LINKING THE REMOTE
To link the remote control to the Comfort Base, please perform the following steps:
1
Press and hold the Link button (the black
round button on the control box located
on the bottom of the base) until the LED
light on the control box turns on and then
off. Release the button and the LED light
will blink.
2
Simultaneously press and hold the Head
Up and Foot Up button (the left button
and middle button located on the top row
of the remote) until the remote's backlight
starts blinking.
Release the two buttons and the backlight
and the LED light on the control box will
blink until linked, then they will turn off.
3
Test the bed to make sure it is working,
and repeat steps if it is not.
14