MN010027A01-AA
Safety and Legal
Important Safety Instructions
This document contains important safety and operating instructions. Please read these instructions
carefully and save them for future reference.
Before using the battery charger, read all the instructions and cautionary markings on the charger, the
battery, and the radio using the battery.
WARNING:
•
To reduce the risk of damage to the power cord, pull the plug rather than the cord when
disconnecting power cord from the AC outlet or the charger.
•
To reduce the risk of fire or electric shock, avoid using an extension cord. If an extension cord must
be used, ensure that the cord size is 18 AWG for lengths of up to 6.5 feet (2 m), and 16 AWG for
lengths up to 9.8 feet (3 m).
•
To reduce the risk of fire, electric shock, or injury, do not operate the charger if it is broken or
damaged in any way. Take it to a qualified Motorola Solutions service representative.
•
To reduce the risk of fire or electric shock, do not disassemble the charger. It is not repairable and
replacement parts are not available.
•
To reduce the risk of electric shock, unplug the charger power adapter from the AC outlet before
attempting any maintenance or cleaning.
•
To reduce the risk of injury, charge only the rechargeable authorized batteries. Other batteries may
explode, causing personal injury and damage.
•
To reduce the risk of fire, electric shock, or injury, only use the accessories recommended by
Motorola Solutions.
•
Changes or modifications made to this device, not expressly approved by Motorola Solutions, could
void the authority of the user to operate this equipment.
Operational Safety Guidelines
•
This equipment is not suitable for outdoor use. Use only in dry locations or conditions.
•
Connect the equipment only to an appropriately fused and wired supply of the correct voltage, as
specified on the product.
•
Disconnect from line voltage by removing the main plug from the outlet.
•
The socket outlet to which this equipment is connected must be close by and easily accessible.
•
Maximum ambient temperature around the charger must not exceed 40 °C (104 °F).
•
Ensure that the cord is located in an area that is safe from being stepped on, tripped over, or
subjected to water, damage, or stress.
•
Output power from power supply unit must not exceed the ratings specified on the product label
located on the bottom of the charger.
4