lack of experience and knowledge if they have been given an
appropriate supervision or instruction concerning the safety
use of the appliances and understand the dangers involved.
• Keep all plastic bags and packaging components out of the
reach of children. They are potentially dangerous.
• Do not connect the appliance to the mains without checking
that the voltage on the rating plate and that of your household
are the same.
• VERY IMPORTANT: Do not immerse the fan in water or any
other liquid.
• This appliance has been designed for domestic only. Don't
allow children play with the appliance. Keep the fan out of the
reach of children.
• Make sure the appliance is not in direct contact with hot
surfaces or objects.
• Always place it on a flat and stable surface.
• Do not use outdoors or in any room with high humidity or
exposure to water.
• If the power cord or any other component is damaged, it must
be replaced by the manufacturer or by its after-sales service or
similar qualified personnel in order to avoid a danger.
ASSEMBLING INSTRUCTIONS
1. Make sure the place where the fan is going to be installed is wide enough, to improve the flow of air
through the room
2. To prevent the blades from colliding with any object, it is recommended to leave a minimum distance of
0.60 meters (x) on each side.
3. The fan must be installed in such a way that the blades are 2.3 meters from the ground (y).
4. The location chosen for its placement must be able to support a minimum of 45 kg in order to support the
weight of the fan.
5. Note: the fixing screws (11) (included) are designed to be used with the fan on a wooden ceiling. If the
installation is carried out on a different material (concrete, false ceiling, etc.) it is recommended to use the
appropriate fixing screws for that material (not included). Fig. 1
12