Descargar Imprimir esta página

Gardena MultiControl duo Libro De Instrucciones página 16

Control de riego
Ocultar thumbs Ver también para MultiControl duo:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
2. FUNCTION
With the Water Control, the garden can be watered
fully automatically up to 3 times a day (every
8 hours) via both outlets. Sprinklers, a sprinkler
system or a drip head watering system can be
used for watering.
The Water Control carries out watering fully auto-
matically according to the set program and can
therefore also be used during holidays. Early in the
morning or late in the evening, evaporation and
therefore water consumption is lowest.
Controls [ Fig. F1 ]:
The watering programme is easily entered using the
controls.
Control
Function
(1)
Man. button
For switching the water throughput
on or off manually.
(2)
OK button
Applies the values set with the ▼-▲
buttons.
(3)
Menu button
Changes to the next programme
level.
(4)
Change the adjustable values in
▼-▲-buttons
(V1 / V2)
each (V1 / V2) level / selection of outlet
(V1 / V2) in Level 1.
Display levels:
The 6 display levels can be selected one after the
other by pressing the Menu key.
Level 1:
Normal display
Current time and day of the week
Level 2:
Level 3:
Watering start time
Watering duration
Level 4:
Watering frequency
Level 5:
Level 6:
Switch programme on or off /
Deactivate sensor
The display level can be changed at any time by
pressing the Menu button. All programme data
changed up to this time and confirmed with the
OK button is saved. If data is changed during
programmed irrigation and confirmed with the
OK button then the valve is closed.
16
GAR_01874-20.960.11_2023-12-08.indb 16
GAR_01874-20.960.11_2023-12-08.indb 16
Display messages [ Fig. F2 ]:
Display
Display
(5)
Weekdays
Current weekday
Mo , Tu ...
grammed watering days .
(6)
Time
Current time of day (flashes when
in input mode).
(7)
am / pm
Display for 12-hour clock
(e. g. in USA, Canada).
(8)
Start
Watering start time (flashes when
in input mode).
(9)
Run Time
Watering duration (flashes when
in input mode).
(10)
8h, 12h, 24h,
Watering cycle (with
2nd, 3rd, 7th
Every 8 / 12 / 24 hours;
every 2nd / 3rd / 7th day.
(11)
Prog
/
Watering programme on (
ON ON
OFF
OFF
off (
).
OFF
OFF
(12)
Direct sensor
Watering is automatically controlled
control
between 20:00 and 06:00 via the
Soil Moisture Sensor.
(13)
Sensor 1 / 2
Dry sensor dry:
dry / wet
watering is carried out.
Wet sensor wet:
watering is not carried out.
(14)
Valve ï V1 /
The arrow indicates the selected
Valve V2 ð
valve:
– displayed : the valve is connected
– flashing :
(15)
Battery
Indicates 5 battery levels:
3 bars:
2 bars:
1 bar:
0 bar:
Frame is
flashing:
If the battery frame is flashing, the valve is no longer
opened. A valve opened by the programme
will also close again if the battery is flat.
The battery display is reset when the battery is
changed.
, or pro-
activated).
) /
ON ON
the valve is open
Battery fully charged
Battery half full
Battery low
Battery almost flat
Battery flat
08.12.23 11:47
08.12.23 11:47

Publicidad

loading

Este manual también es adecuado para:

1874