Descargar Imprimir esta página

Bresser MyTime iO NX Manual De Instrucciones página 9

Reloj de pared radio controlado con medición de temperatura y humedad

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

their voltage supply, effective range, and life span.
3. All units required are within range and the path is
clear of obstacles and interference. Shorten the
distance if necessary.
Transmission collision
Signals from other household devices, such as
door bells, home security systems and entry con-
trols, may interfere with those of this product and
cause temporarily reception failure. This is normal
and does not affect the general performance of
the product. The transmission and reception of
temperature readings will resume once the inter-
ference recedes.
Other malfunctions
If there is no response from the wall clock by key-
strokes or if any other malfunctions occur perform
the following steps.
NOTE!
With this procedure all received data will be delet-
ed.
1. Press RESET button (10) with a pointed instru-
ment (e.g. pen).
2. The clock hands will move to their start position
(12:00 a.m.) and the wall clock then tries to re-
ceive the signal.
3. Wait approx. 2-5 minutes until the current time
will be displayed.
CLEANING AND MAINTENANCE
Before cleaning the device, disconnect it from the
power supply (remove batteries)!
Only use a dry cloth to clean the exterior of the de-
vice. To avoid damaging the electronics, do not use
any cleaning fluid.
Protect the device from dust and moisture. The
batteries should be removed from the unit if it has
not been used for a long time.
DISPOSAL
Dispose of the packaging materials properly,
according to their type, such as paper or card-
board. Contact your local waste-disposal service
or environmental authority for information on the
proper disposal.
Do not dispose of electronic devices in the
household garbage!
As per Directive 2002/96/EC of the European Par-
liament on waste electrical and electronic equip-
ment and its adaptation into German law, used
electronic devices must be collected separately
and recycled in an environmentally friendly man-
ner.
EC DECLARATION OF CONFORMITY
Bresser GmbH declares that the device
(MyTime
iO
8020211000000) is in accordance with applicable
guidelines and corresponding standards of the
2014/53/EU directive. Find the complete declara-
tion under:
www.bresser.de/download/8020211000000/
CE/8020211000000_CE.pdf
Wall
Clock
/
Art.No.:
DE
GB
FR
IT
ES
9

Publicidad

loading