Publicidad
Idiomas disponibles
Idiomas disponibles
Risks / Transporting the truck
EN
Now proceed to make the checks listed below:
•
Inspect the truck to make certain there is no damage and there are no parts
missing.
•
Install the battery, making sure not to damage any electrical wires.
•
Charge the battery.
•
Check the battery charge level (Indicator).
•
Test the lift and lower system.
•
Make a general inspection of the controls and instrumentation.
NOTE: It is normal for wheels to show some deflection or distortion in shape after
the truck is parked for an extended period. The wheels will restore to their original
shape after the truck is driven for a time.
WARNING
Any damage or incorrect operation of the truck must be reported immediately
to the distributor service centre.
Never start the truck if it is damaged or defective.
Trucks may only operate when they are in good condition.
NOTE: If the truck needs to be repaired, place a clearly visible sign saying
"OUT OF ORDER - DO NOT USE" on the truck and remove the key from the
control panel.
EN56 - Use and maintenance manual
Publicidad
