Publicidad
Idiomas disponibles
Idiomas disponibles
Description / Operating instructions
EN
REPAIR PROCEDURES
BRAKE RELEASE MODE (SERVICE MODE)
WARNING
The brake release mode is for service use only. To reduce the risk of personal
injury, do not use brake release mode in normal operation.
This pallet truck is fitted with an electromagnetic brake.
When the truck has no power, the brake is closed and the truck will not move. If the
truck has no power but must be moved to a service location, enter brake release
mode so that the truck can be pulled manually.
1. Make sure the power is off and the power button is down.
2. Press and hold the Horn button, then lift the power button to provide power to
the truck.
The display will read NO BRAKE and the truck will beep to indicate the brake
release mode is active.
3. Manually pull the truck to the service location.
EN68 - Use and maintenance manual
Engineering Mode
(Brake Release)
Horn Remains Pressed & Power On
Hold
NO BRAKE
Publicidad
