Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance / Battery
EN
BATTERY PROTECTION STOPPER INSTALLATION INSTRUCTION
1. Take out screw (#1), block (#2) and washer (#3) in the manual bag and combine
these three items as shown.
2. Align the mounting hole and tighten the screw.
1. Put in the battery, rotate the anti-jumping stopper against battery and tighten
the screw.
2. Loosen the screw and rotate the anti-jumping stopper in the opposite direction,
and pull out the battery vertically.
EN78 - Use and maintenance manual
Publicidad
