Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance / Battery
EN
3. The battery protection class is IP20, when installed in the machine, it is IP50.
Please do not wash the battery directly with water.
It is strictly prohibited to use non-original chargers to charge the truck battery.
It is strictly forbidden to use the pallet truck charger to charge other batteries.
RECHARGING PROCEDURE
WARNING
Follow the instructions on the instruction manual of the battery and battery
charger for the recharging procedure.
It is good practice to allow a battery to cool down after taking it out of service
and before starting to recharge.
•
Take the truck to a recharge area.
•
Turn off the truck, then press down the emergency power off (item 1).
•
Disconnect the battery connector (item 2).
•
Connect the charger to the battery connector and begin the charging cycle
according to the battery and charger manufacturers' instructions.
EN96 - Use and maintenance manual
Publicidad
