Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance / Battery
EN
REPLACE THE LOAD WHEEL
1. Turn off the truck, remove the battery, and turn over the truck. Be careful to
avoid damaging the tiller handle.
2. Remove snap ring (item 1) with snap ring pliers, then remove the shaft (item 2).
3. Tap out the spring pin (item 3), then tap out the wheel fork shaft (item 4).
4. Remove the load wheel assembly (item 5 for tandem wheel, item 13 for single
wheel).
5. Tap out the spring pin (item 6 or 9), then remove the wheel shaft (item 7 or 10)
and remove the load wheel.
6. Replace the load wheel (item 8 for tandem wheel, item 12 for single wheel). For
single wheels, install nylon gasket (item 11).
7. Reinstall wheel shaft and spring pin.
8. Reinstall the load wheel assembly into the frame, then repeat steps 1 through
3 in reverse order to complete installation.
EN80 - Use and maintenance manual
Publicidad
