Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
INSTRUCTIONS
It is important to keep this heater clean. Clean your heater at
least annually or as needed. Your heater will give you years of
service and comfort with only minimum care. To assure efficient
operation follow the simple instructions below.
ALL SERVICING BEYOND SIMPLE CLEANING THAT
REQUIRES DISASSEMBLY SHOULD BE PERFORMED BY
QUALIFIED SERVICE PERSONNEL.
TO REDUCE RISK OF FIRE AND ELECTRIC SHOCK OR
INJURY, DISCONNECT ALL POWER COMING TO HEATER
AT MAIN SERVICE PANEL AND CHECK THAT THE ELEMENT
IS
COOL
BEFORE
MAINTENANCE.
User Cleaning Instructions:
1. After the heater has cooled, a vacuum cleaner with brush
attachment may be used to remove dust and lint from exterior
surfaces of the heater including the grille openings.
2. With a dry cloth, wipe dust and lint from grille and exterior
surfaces.
3. Return power to heater and check to make sure it is operat-
ing properly.
Replacement Parts
Elements and aluminum extrusions are not replaceable. Due to
the intrinsic design of the cove heater, we are unable to furnish
elements, extrusions, wires, back shields, and junction boxes
as replaceable parts, however, the following parts kit is
available.
Part Kit 1. Part number RIK-918MT-W for white cove heaters.
The above kit contain end caps, end brackets, center bracket,
mounting template, and mounting hardware.
Accessories (Optional)
918IR-T-Z
Integral Thermostat: Range 45-90ºF with positive off.
918IR-SP-W Splice Plate Assembly.
SERVICING
OR
PERFORMING
Publicidad
