Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMED
EDIT
RECORDING
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining
time
cannot be programmed.
3,7
3,7
8
FUNCTION
4,5
4
m
Programmed
edit function
enables CD recording
while checking
the remaining
time on each side of the tape as the tracks are
programmed.
m
The programmed
edit recording will not start from a point halfway
in the tape.
The tape must be recorded
from the beginning
of
either side.
Use the remote control from steps 3 to 8
1
2
3
4
5
Insert the tape into the deck.
Insert the tape with the side to be recorded
on first facing out
from the unit,
Press the CD button on the main unit so that "CD"
is displayed, and load the disc.
You can press the FUNCTION
button on the remote control
repeatedly
to display
"CD, "
Press
the EDIT/CHECK
button
twice
while
pressing the SHIFT button.
Press the numbered
buttons to designate
the
tape length.
10 to 99 minutes can be specified.
Example:
When using a 60-minute
tape, press the 6 and O
buttons.
The 44
and -
buttons
are also available
to designate
the tape length.
Press the numbered buttons to program a track.
Example: To select the 10th track, press the numbered buttons
+10 and O.
Selected
track
Program
number
number
Remaining
time of side A
Programmed
tracks
7 Press the EDIT/CHECK button while pressing the
SHIFT button to select side B and program the
tracks for side B.
After confirming
B on the display, repeat step 5.
Tape side B (reverse
side)
I
8 Press the O button and then press the>
button
within 2 seconds to start recording.
m
The tape is rewound
to the beginning
of the front side, the
lead segment
is played through for 10 seconds,
and recording
starts.
When recording
on the front side (A) ends, recording
on the back side (B) starts.
To stop
recording
Press the
button,
Recording
and CD play stop simultaneously.
To check the order of the programmed
track numbers
Before recording,
press the EDIT/CHECK
button while pressing
the SHIFT button to select side A or B, and press the EP
button
repeatedly.
Track number
Program
number
Programmed
tracks
To change the program of each side
Press the EDIT/CHECK
button while pressing
the SHIFT blJtton
to select side A or B, and press the
button to clear the program
of the selected
side.
Then program
tracks again.
To clear the edit program
Press the
button twice.
m
Recording
is inhibited
if the erasure
prevention
tab on either
side of the tape is broken off.
ENGLISH
14
Publicidad
