SPECIFICATIONS
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Input
outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 MHz to
108 hfHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz
step)
(10 kHz
531 kHz to 1602 kHz (9 kHz step)
350 pVlm
Loop antenna
10 W + 10 W (1 kHz, T.H. D.
10 %, 8 ohms)
0.1 % (5 W, 1 kHz, 8 ohms)
AUX: 0.5 V
SPEAKERS:
accept speakers of
8 ohms or more
PHONES
(stereo
mini jack):
accepts headphones
of 32 ohms
or more
4 tracks, 2 channels stereo
Normal tape: 50 Hz – 15000 Hz
AC bias
Recording/playback
x 1
Erase head x 1
Compact disc player section
Laser
Semiconductor
laser (k= 780 nm)
D-A
converter
1 bit linear
Wow and flutter
Unmeasurable
SPEAKER SYSTEM
Cabinet type
1 way, bass reflex
Speakers
100
mm (4 in.) cone type
Impedance
8
ohms
Dimensions
(W x H x D)
160 x 255x 253.5 mm
(63/8 x 10'/8x
10 in.)
Weight
i
.5 kg (3 Ibs 5 OZ.)
GENERAL
Power requirements
AC:120V,60HZ
DC:12V
Power consumption
24 W
Dimensions
of main
unit
160 x 255 x 244 mm
(W XHXD)
(63/8 x 101/, x 91/2 in.)
Weight of main unit
3.1 kg (6 Ibs 13 OZ.)
COPYRIGHT
Please check the laws on copyright
relating to recordings
from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment
has been tested and found to comply
with the
limits for a Class B digital device, pursuant
to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection
against
harmful
interference
in a residential
installation.
This equipment
generates,
uses, and can radiate radio frequency
energy
and, if not installed
and used in accordance
with the
instructions,
may cause harmful interference
to radio communi-
cations.
However,
there is no guarantee
that interference
will
not occur in a particular
installation.
If this equipment
does cause
harmful
interference
to radio or television
reception,
which can
be determined
by turning the equipment
off and on, the user is
encouraged
to try to correct the interference
by one or more of
the following
measures:
- Reorient
or relocate
the receiving
antenna,
- Increase
the separation
between
the equipment
and receiver.
- Connect
the equipment
into an outlet on circuit different
from
that to which the receiver
is connected.
- Consult
the dealer or an experienced
radio/TV
technician
for
help.
CAUTION
Modifications
or adjustments
to this product,
which
are not
expressly
approved
by the manufacturer,
may void the user's
right or authority
to operate
this product.
Specifications and external appearance are subject to change without
notice.
19
ENGLISH