Celexon CLR HomeCinema UST Manual De Usuario página 14

DISCLAIMER
The information in this document is subject to change without notice by the
manufacturer. Changes will be added to subsequent versions of this manual.
Errors expected.
CARE INSTRUCTIONS
NEVER clean the screen with alcohol or other cleaning agents containing
solvents. Do not use cloths or other textiles to clean the projection surface.
Use only the cleaning brush provided when the screen is dry and dust-free.
Brush across the screen cloth in horizontal movements. Make sure that you do
not make any vertical or circular movements, otherwise dust and dirt will be
deposited on the structure of the cloth and impair the projection
result. The screen fabric must not come into contact with dampness. Avoid
contact with pointed or sharp objects as these could permanently damage the
projection screen fabric. Cleaning the projection screen surface too often is
disadvantageous as more scratches can occur in the surface. Always close the
projection screen whenever it is not in use. Prevent the screen motor from
running more than 3 minutes at a time as this will activate the heat protection
of the motor and the screen will be completely deactivated. Only after the
screen has a rest period of 20-30 minutes can it be put back into operation.
3