Celexon CLR HomeCinema UST Manual De Usuario página 18

CONTROL VIA THE REMOTE CONTROLS
The screen is supplied with one infrared and one radio remote control. Make
sure that any protective film has been removed from all transmitter and
receiver devices, the remote controls are charged (or batteries are inserted),
the screen is connected to the power supply and the power is set to ON.
USE OF THE RADIO REMOTE CONTROL (RF)
The use of an
recommended when there is a large distance between
the remote control and the screen, or objects can
obstruct the line of sight between the remote control
and the screen. The RF remote is already programmed
and can be used straight from the box.
USE OF THE INFRARED REMOTE CONTROL (IR)
The use of an IR remote control is recommended
when there is a small to medium distance between the
remote control and the screen. The IR remote control
can only be used when the supplied IR eye is within the
viewing range of the remote control.
Power
It is possible to set the stop points. Please request the instructions for this procedure from
your specialist dealer or directly via www.celexon.com
RF remote control
Up
Stopp
Down
is always
7