Publicidad
Idiomas disponibles
Idiomas disponibles
•
Set the throttle control (A) to the "FULL" position to
operate the engine at full speed.
A
To use the choke control
Note:
Use the choke control to start a cold engine. Do
not use the choke control to start a warm engine.
A
1. Pull the knob (A) out to engage the choke control.
2. Push the knob (A) slowly to disengage the choke
control.
To use the cruise control
Only use the cruise control for forward travel on smooth,
straight surfaces. The cruise control will disengage
automatically if the conditions for cruise control become
unsatisfactory.
1. Push the forward drive pedal (B) down. Keep the
forward drive pedal in a position that gives the
correct speed for the terrain.
A
2. Pull the cruise control lever (A) up and hold it while
you release the forward drive pedal.
3. Release the cruise control lever to engage the cruise
control.
4. Push the brake pedal or tap on the forward drive
pedal to disengage the cruise control.
16
B
To use the headlight
•
Push the power switch to position (A) to make the
headlight come on.
B
•
Push the power switch to position (B) to make the
headlight go off.
To use the reverse operation system
(ROS)
Note:
If you try to go rearward with the product
when the cutting deck is engaged, the engine stops
immediately. Engage the ROS to go rearward with the
product when the cutting deck is engaged.
WARNING:
operate the product rearward, look down
and behind the product for the safety of
others.
1. Turn the ignition key counterclockwise to the ROS
"ON" position (A) to engage the ROS.
A
2. Slowly push down the reverse drive pedal to start
movement.
3. Turn the ignition key clockwise to the engine "ON"
position (B) to disengage the ROS.
To engage and disengage the cutting
deck
The product has an operator presence control (OPC).
When you go away from the seat with the engine on and
the cutting deck engaged, the engine stops.
A
Before and while you
B
2235 - 002 - 22.09.2023
Publicidad
