Bell & Ross BR 03 CYBER CERAMIC Guia Del Usuario página 3

ENGLISH
BR 03 CYBER CERAMIC
LTD 500 PCS
BR-CAL.383
mechanical with automatic winding. Calibre BR-CAL.383. Power reserve approximately 48 hours.
Movement:
GENERAL USAGE
When the watch has stopped (crown in position 0): wind the
Starting the watch.
movement by rotating the crown clockwise. After approximately 45 rotations, the
watch is fully wound (the winding mechanism does not have a stop to prevent
overwinding). The power reserve is approximately 48 hours when fully wound.
A
B
c
(x4)
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your watch.
Also, we would recommend that you avoid placing your watch near electronic
devices that may generate large magnetic fields (radio, smartphone, television,
computer, tablet, loudspeakers etc.).
Water resistance. Once the watch is set, to ensure perfect water resistance,
push the crown back to position 0. Never operate the crown underwater.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off the
watch and strap with fresh water. It is also recommended to have the water resis-
tance of your watch checked every two years. To ensure a service that meets the
brand's exacting standards, any servicing of your watch must be carried out by
the Bell & Ross service centre or a watchmaker approved by Bell & Ross.
When the watch is worn , the automatic mechanism will wind the movement.
Setting the time.
crown in the required direction.
A.
Minute hand
B.
Hour hand
0
C.
Strap attachment
D.
Crown
0.
d
Wind the movement manually (rotate clockwise)
1.
Set the time (rotate in either direction)
INTERNATIONAL WARRANTY
To benefit from your 5-year international warranty, your card must be acti-
vated at the time of purchase by your approved Bell & Ross point of sale, and
presented every time an operation is performed. You can now access the digital
version of this card and all the information relating to your watch by scanning the
QR code or visiting:
To ensure a service that meets the brand's exacting standards, any servicing of
your watch must be carried out by the Bell & Ross service centre or a watchmaker
approved by Bell & Ross. The warranty does not, however, include:
. Any damage caused by accidents or by inappropriate or improper use of the
watch (e.g. violent impacts, crushing, rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a retailer
or after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear and tear.
3
hours and minutes.
Functions: Case:
Pull the crown out to position 1. Set the time by rotating the
www.bellross.com/warranty.
42 mm in diameter.