Descargar Imprimir esta página

Zodiac Medline 7.5 Manual Del Propietário página 34

Flotador sistema de propulsión instalación y circuitos
Ocultar thumbs Ver también para Medline 7.5:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

V-2-6 Navigation lights
Press this button to switch on the navigation lights.
There are 3 positions.
 Off
 White light position
 White light, red light, and green light
position.
V-2-7 Wiring an accessory
1º/ Choose a free fuse location.
2º/ Connect the power supply of your accessory to the terminal corresponding to this slot using a
6mm female tab type terminal.
3º/ If you have to add cable for the connection, use cable with a cross-section of at least 1.5mm² that
complies with "marine" standards (UL1426 or SAE J378 or SAE J1127 or SAE J1128 or more generally
meeting ABYC en/or EC standards).
4º/ Connect the earth cable of your accessory to the ground terminal strip using a Ø5 "ring terminal"
(same comment as for the cable above).
5º/ Insert an ATO type fuse with a max current of 15A and greater than the load current of your
device.
18
+
Red wire
6
-
INSTALLATION AND CIRCUIT: ELECTRICAL
Red wire
Page 33 / 44
1
2
Red wire
Red wire
Direct wiring
Wiring with switch
E
N
G
L
I
S
H
3
Issue 3

Publicidad

loading