Welby ABO 523 Manual Del Usuario página 31

The 12-hour time format is indicated by the message " "
and the 24-hour time format by " ".
7. Push the SET button to access voice output mode. With
theM button, you can configure voice output "L1" (English),
"L2" (Spanish) or "OFF" for no voice output.
8. Push the SET button to access volume mode. Set the vol-
ume of the voice output with the M button.
9. Push the START/STOP button
The blood pressure monitor will also automatically save all
settings and switch itself off without any operation for
3 minutes.
It is important to set the date and time. Otherwise,
you will not be able to save the measurement re-
sults correctly and to access them again later.
Notes on use
For ideal measurement results, follow the basic
rules below when measuring your blood pressure.
− Use of the cuff does not pose any biological hazard/risk to
the user if it is worn on the skin.
− Before using the blood pressure monitor, let it reach room
or ambient temperature to prevent falsified measurement
results.
− If possible, always measure your blood pressure at the
same time of day for comparable results.
7
to save the settings.
Notes on use
31