Welby ABO 523 Manual Del Usuario página 41

for correct measurement of blood pressure (see chapters
"Notes on use" and "Performing a measurement").
Average of measurement results
− When the blood pressure monitor is switched off, push the
M button 6
three measurement results of the previously used group.
− The average indicator
along with the average values.
To check the average values from another user, se-
lect the desired user before pressing the M button.
See steps 1–3 in the chapter "Starting a blood pres-
sure measurement".
Checking memory
1. When the blood pressure monitor is switched off, push and
hold the M button
the current user.
The memory slot indicator
the current memory slot
2. Push the M button repeatedly to scroll through all memory
slots with the saved measurement results.
There are 60 memory slots for each user. When all memory
slots are used, the oldest stored measurement results will
be erased to free up a memory slot for the new results.
To check the memory from another user, select the
desired user before you push and hold the M but-
ton. See steps 1–3 in the chapter "Starting a blood
pressure measurement".
to show the average values from the last
23 will show on the display
6
to access the stored readings for
19
18
Evaluating the measurements
will be shown along with
.
5
41