Astoria Core600 AL Manual De Uso Y Mantenimiento página 68

Core600
8.
Programming
SAE version
8.1
8.1.1 Programming the coffee dispenses
The machine is programmed by default. Should the
coffee doses need to be modified, proceed as follows:
Always programme the right hand push-button panel
first. In this way all push-button panels get automati-
cally programmed. If necessary,
subsequently programme the
others;
Place the cup under the dis-
pensing spout;
Press the button for at
least 5 seconds, until all the dose
button LEDs are lit;
Press the desired dose button,
for example ;
To confirm the dose, press
the button again or the
button;
Repeat this operation for the
other dose buttons;
When the programming is com-
plete, press the
until all of the LEDs on the push
button panel go off.
Programming of every dose must be carried out with ground coffee
and not with previously used coffee dregs.
68 300
of
button
8.1.2 Programming the automatic hot water
The machine is programmed by
default. Should the hot water doses
need to be modified, proceed as
follows:
Place the jug under the hot water
nozzle;
Press the
least 5 seconds until all of the dose
button LEDs are lit;
press the hot water button
To confirm the dose press the
button again;
When the programming is com-
plete, press the
until all of the LEDs on the push
button panel go off.
button for at
;
button
USER manual