SEVERIN KS 9859 Instrucciones De Uso página 19

Diagram similar!
1. Open the freezer door.
2. Remove the four covers C from the housing and inside
of the door.
3. Replace the extension of the 2-part cover, turned
through 180, on the opposite side.
4. Unscrew the hinge bolt on the inside of the door in the
area C/6. Caution: Support the door.
5. Take off the freezer door and place it on a soft surface.
Remove the hinge support from the underside of the
door and fi t the hinge support provided on the opposite
side.
6. Take out the fi xing screws and remove the upper
bracket 6. Note the small plastic plate underneath the
bracket.
7. Turn the bracket 6 including the small plastic plate
through 180° and replace it on the other side of the
cabinet freezer, using the two screw holes adjacent to
each other.
8. Remove the lower panel 1 by lifting it up slightly.
9. Take out the fi xing screws and remove the bracket 2
with its hinge bolt.
10. Unscrew the hinge bolt, together with the serrated
lock washers, from the bracket, and fi t it into the
corresponding opening on the opposite side of the
bracket.
11. Remove the bracket 7 and replace it with the holding
bracket 2 with its hinge bolt.
12. Now install the holding bracket 7 in the previous
position of the bracket 2.
13. Place the freezer door onto the hinge bolt on holding
bracket 2. Caution: Support the door.
14. Insert the hinge bolt of the bracket 6 into the freezer
door and secure the bracket on the unit.
15. Fit the four covers C over the bracket and the
openings.
16. Take out the cover 10 from the lower panel 1 and
replace it on the opposite side.
17. Replace the panel 1 on the appliance.
18. Remove the screw covering caps a and the sealing
plugs b.
19. Take out the screws holding the door handle. Fit the
handle on the opposite side, using the fi xing screws to
secure it. Push the sealing plugs into the now empty
openings in the door and replace the covering caps on
the screw heads.
Disposal
Appliances that are marked with this symbol have
to be disposed of separately from household
rubbish. These appliances contain valuable
resources that can be recycled. A correct waste
disposal protects the environment and the health of those
around you. To get informed about it, either defer to your
municipal administration or the retailer.
∙ Pull the mains plug out of the socket and disconnect it
from the appliance before getting rid of it.
∙ The cooling medium Isobutane (R600a) and
the propellant in the isolation Cyclopentane
(C5H10) are infl ammable substances, thus,
need to be appropriately disposed of.
∙ Make sure the tubes of the cooling circuit don't get
damaged before the proper disposal.
Guarantee
This product is guaranteed against defects in materials
and workmanship for a period of two years from the date
of purchase. Under this guarantee the manufacturer
undertakes to repair or replace any parts found to be
defective, providing the product is returned to one of our
authorised service centres. This guarantee is only valid
if the appliance has been used in accordance with the
instructions, and provided that it has not been modifi ed,
repaired or interfered with by any unauthorised person, or
damaged through misuse.
This guarantee naturally does not cover wear and tear,
nor breakables such as glass and ceramic items, bulbs
etc. This guarantee does not affect your statutory rights,
nor any legal rights you may have as a consumer under
applicable national legislation governing the purchase
of goods. If the product fails to operate and needs to
be returned, pack it carefully, enclosing your name and
address and the reason for return. If within the guarantee
period, please also provide the guarantee card and proof
of purchase.
Information needed by the Customer Service
Department
Should repairs to the appliance become necessary, please
contact our Customer Service Department, providing a
detailed fault description and quoting the model number
KS ... on the rating plate of the appliance (see picture). This
information will help us to handle your request effi ciently.
In case of any malfunction or other problem, please
contact our Customer Services Department. The
address can be found in the appendix to this manual.
19