Hilti DSH 700 Manual De Instrucciones página 45

Fault
Cutting disc rotates while the
motor is idling
Starter unit doesn't work
en
10 Disposal
Most of the materials from which Hilti machines or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back old machines and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.
Recommended pretreatment for the disposal of slurry
NOTE
Disposing of slurry directly into rivers, lakes or the sewerage system without suitable pretreatment presents environ-
mental problems. Ask the local public authorities for information about current regulations.
1. Collect the slurry (e.g. using a wet-type industrial vacuum cleaner)
2. Allow the slurry to settle and dispose of the solid material at a construction waste disposal site (the addition of a
flocculent may accelerate the separation process).
3. The remaining water (alkaline, pH value > 7) must be neutralized by the addition of an acidic neutralizing agent or
diluted with a large volume of water before it is allowed to flow into the sewerage system.
11 Manufacturer's warranty
Please contact your local Hilti representative if you have
questions about the warranty conditions.
12 EC declaration of conformity (original)
Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, until 19th April 2016: 2004/108/EC, from
20th April 2016: 2014/30/EU, 2011/65/EU, 2000/14/EC,
EN ISO 12100, EN ISO 19432.
38
Possible cause
Faulty centrifugal clutch.
The clutch claws are not engaging.
Hilti Corporation, Feldkircherstrasse 100,
cut-off saw
FL‑9494 Schaan
DSH 700/ DSH 900
01
2008
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
05/2012
Technical documentation filed at:
Remedy
Replace the centrifugal clutch.
Clean the parts so that they can move
freely.
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Johannes Wilfried Huber
Senior Vice President
Business Unit Diamond
05/2012