Publicidad
Idiomas disponibles
Idiomas disponibles
LIGHTING THE STOVE.
NO CIRCUMSTANCES MOVE the stove when it is lit, either with or
without pots. If, due to the wind, the flames are forced down under the
burner, turn the stove off and move it to a more sheltered location.
1.
Rotate the gas supply handle for the burner about one turn anti-clockwise, and press
the lever if the stove is equipped with a piezo ignition. Otherwise use suitable lightning
equipment.
2.
If the burner does not ignite after five attempts with the ignition button, turn off the supply
(clockwise as far as it will go) and wait five seconds for the unignited gas to dissipate.
Turn on the gas supply and try again.
3.
Once the gas has been lit, you can adjust the flame and the supply of heat with the
supply handle. The gas should burn directly upwards with a steady flame.
4.
Put the pot or frying pan on the stove after the gas has been lit.
5.
Do not touch while it's still warm!
importanT:
UNDER
EN
Publicidad
