Silvercrest SSM 180 A2 Instrucciones De Uso página 46

NOTE
If you clean the appliance directly after use, you
will usually achieve sufficiently hygienic cleaning
results for the blender jug
holder by using the following alternatives:
► Fill the blender jug
and add a few drops of mild detergent.
► Attach the blade holder
onto the base .
► Press the start button
that the blade
► Afterwards, rinse the blender jug
blade holder with plenty of clear water
so that all detergent residues are removed.
■ After cleaning, dry all parts thoroughly.
■ Reassemble the blade holder
–
Place the plastic ring
holder so that the grey plate
through the slot in the blade holder
–
Place the sealing ring
firmly into place.
If the sealing ring and the plastic ring
correctly fitted, the appliance will not start!
NOTE
► You can also clean the lid
jug and the blade holder
sealing ring and the plastic ring
your dishwasher. If possible, place the parts
in the upper basket and ensure that none of
the parts can get stuck. Otherwise they might
deform.
SSM 180 A2
and the blade
with 400 ml of water
and screw both
a few times so
ploughs through the water.
and the
:
into the blade
protrudes
over it and press it
, the blender
with the
in
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry location.
.
are not
GB │ MT
│ 43 ■