Next Level Racing ERS3 Manual Del Usuario página 12

support@nextlevelracing.com
16
Uninstall the T-Nuts from the upper outside channel in the Left and Right Base Members where the
Ratchet Handles were installed.
17
Install the T-Nuts previously uninstalled in Step 16 into the top channel of the Base Members.
18
Reinstall the Bolts, Washers and End Caps previously uninstalled in Step 15.
Repeat
on Other
Side
12 12
PARTS:
• • NIL
PARTS:
• • 4 x T-Nuts
PARTS:
• • 2 x M8 45mm Bolts
• • 2 x M8 Washers
• • 2 x 40x80 End Caps