Next Level Racing ERS3 Manual Del Usuario página 20

support@nextlevelracing.com
A)
40
A) Lift the Seat Slider Lever and slide the Seat Rails all the way back to access the front mounting Bolts on the Seat.
B) Uninstall the Bolts securing the Seat Sliders to the Seat.
A)
NOTE: If the Seat Slider Lever pops out, the
individual Seat Sliders can be manually activated.
To do so, use a cloth to protect your hands, press
up on the Zinc Plated Lever and slide the Seat Rails.
A) Lift the Seat Slider Lever and slide the Seat Rails all the way forward to access the rear mounting Bolts on the Seat.
41
B) Uninstall the rear M8 Low Profile Bolts securing the Seat Sliders to the Seat, and remove the assembly including the
Seat Spacers.
A)
42 A) Align the Seat Slider front mounting holes with the threaded inserts on the Seat.
B) Bolt through and hand tighten M8 Bolts uninstalled in Step 39 to help align the Seat Rail rear slots.
B)
NOTE: Make sure Seat Sliders
B)
B)
20 20
PARTS:
• • NIL
do not splay open after
removing front Bolts.
PARTS:
• • NIL
PARTS:
• • 2 x M8 Bolts
Repeat
on other
side