Next Level Racing ERS3 Manual Del Usuario página 7

A)
WARNING:
Make sure both Seat Recliner Arms are set to the same angle before
assembling the seat. If an adjustment is required use a cloth to protect your
hand while adjusting. Remove warning labels once adjustment has been made.
01
A) Align the threaded inserts on the Seat Backrest with the mounting holes on the Seat Recliners.
B) Bolt through and secure with the M8 Bolts and Washers.
A)
02
A) Align the mounting hole on the Seat Recliner Covers with the Seat Recliners.
B) Bolt through and secure with the M5 Bolts and press fit the Bolt Covers to cover the hole.
SEAT RECLINER ADJUSTMENT
03
Lift both Seat Recliner Levers to change the angle of the Seat Backrest. Release the levers adjusting
the backrest to lock in place.
Video Instruction: bit.ly/nlrbuild
B)
B)
WARNING: The Seat Recliners
are spring loaded, take care when
adjusting to avoid injury.
7
PARTS:
• • 1 x Seat Backrest
• • 1 x Seat Bottom
• • 4 x M8 25mm Bolts
• • 4 x M8 Washers
Repeat
on Other
Side
PARTS:
• • 1 x Right Seat Recliner Cover
1 x Left Seat Recliner Cover
• • 2 x M5 12mm Bolts
• • 2 x Bolt Covers
PARTS:
• •
NIL