Panasonic EYADA Serie Manual De Instrucciones página 13

PREPARATION BEFORE USE
Using Forward/Reverse Lever
With the forward/reverse lever, you
can change the rotation direction of the
Electric Screwdriver or lock the start.
Trigger
switch Rotation direction
position
R Reverse (Anticlockwise)
○
Trigger switch locked
F Forward (Clockwise)
Trigger switch lock
When you switch the forward/reverse
lever to the "○" position, the start of
the Electric Screwdriver is locked and
it does not rotate.
When attaching accessories or a
bit, or when not working, switch the
forward/reverse lever to the "○"
position to lock the trigger switch.
NOTE
⿟ If the forward/reverse lever is
switched while the motor is
in action, the motor is forcibly
stopped to rotate.
EYADA_EU.indb EYADA_EU.indb 13 13
Attaching Screwdriver Hanger
Pull the screwdriver hanger
lightly on both sides.
Pulling the screwdriver hanger hard
may prevent it from returning to its
original position.
Perform attachment and removal
with necessary force.
Put it into the screwdriver
hanger mounting hole.
Screwdriver hanger mounting hole
R position
○ position
Pull the screwdriver
F position
hanger lightly on
both sides.
Attach the screwdriver hanger and the
tool balancer as shown in the figure.
Screwdriver
hanger
Hang the screwdriver hanger
on a hook of the tool balancer.
Screwdriver hanger
mounting hole
Tool balancer
Hook
13
2023/11/01 2023/11/01
EN
16:44:21 16:44:21