Panasonic EYADA Serie Manual De Instrucciones página 25

COUNT MENU (c + NUMBER)
c1 Count Quantity Setting
The number of screws to fasten is set.
The number of fastened screws
determined as OK is counted, and when
it reaches the set quantity, you are
notified of that with a buzzer and the
lighting detection lamp.
• The count quantity appears on the tool
display in operation mode.
• When it reaches the set quantity, the
count on the display will be reset.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "c1" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "- -".
Display
EYADA_EU.indb EYADA_EU.indb 25 25
P. 20, 21
P. 22
Count quantity
OFF
1 screw
99 screws
When it is set to "3"
A short
A short
beep
beep
Solid green Solid green
1st screw 2nd screw
Fastening Fastening
OK OK
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
A long
beep
Solid blue
3rd screw
Fastening
OK
25
EN
2023/11/01 2023/11/01 16:44:25 16:44:25