Panasonic EYADA Serie Manual De Instrucciones página 26

COUNT MENU (c + NUMBER)
c2 Count Method Setting
You can switch count methods for
screw fastening.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "c2" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display
26
EN
EYADA_EU.indb EYADA_EU.indb 26 26
Count-down mode
P. 22
Count method
Count down
( The number of
fastened screws is
counted from the set
value down to 0.)
Count up
( The number of
fastened screws is
counted from 0 up to
the set value.)
(cont.)
Count-up mode
3, 2...
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
1, 2...
2023/11/01 2023/11/01 16:44:25 16:44:25