Panasonic EYADA Serie Manual De Instrucciones página 31

c7 Batch Complete Judgement Waiting Time Setting
You can set the waiting time from when
the last screw fastening is determined
as OK to when it is determined as
count-up (count complete).
During the set waiting time, you can
reverse rotations after finishing the last
screw set in the count quantity.
• Forward rotations are not allowed during
the waiting time.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "c7" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "-.-".
Display
judgement waiting time
EYADA_EU.indb EYADA_EU.indb 31 31
P. 22
Batch complete
OFF
0.1 s
9.9 s
When it is set to "3.0"
Reverse rotations are
allowed for 3.0 s.
After the last screw fastening is determined as
OK, no count-up will occur for 3.0 s, allowing you
to reverse rotations to redo or loosen screws.
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
31
EN
2023/11/01 2023/11/01 16:44:26 16:44:26